Call
Every boiler fully fitted from £1,900 across Bridgend, with VAT, the flush and the filter included

Boiler installation day: what to expect, hour by hour

Updated 28 September 2026 · 2 minute read

Most like-for-like combi swaps in Bridgend are done in a single day. Here is how the day usually runs, and what you can do to make it go smoothly.

Before the day

  • Clear the space around the boiler, and a path to it from the door.
  • Move anything fragile away from the area and from under radiators.
  • If the boiler is in a loft, make sure there is safe access and a light.
  • Know where your gas meter and stop tap are.

Morning

The engineers arrive, protect the floors, and talk through the plan with you. The gas and water are turned off. The system is drained and the old boiler is taken off the wall and removed.

Midday

The new boiler goes up. The pipework is adapted to suit it, the new flue is fitted, and the condensate pipe is run. The magnetic filter is fitted on the return pipe.

Afternoon

The system is refilled and flushed, then the inhibitor goes in. The boiler is fired up, tested and commissioned, and the gas safety checks are done.

Before they leave

You are shown how to use the boiler and its controls, how to top up the pressure, and what to do if it shows a fault code. The warranty is registered, the Benchmark checklist is filled in, and the Building Regulations notice is submitted. The old boiler and packaging are taken away.

How long without heating?

For a straight swap, usually just the working day. Bigger jobs, like moving the boiler or a back boiler replacement, can take a day or two longer, and you are told before you book.

Read how long a boiler installation takes, or get a fixed price.

Get your fixed price for a new boiler in Bridgend

Five quick questions. Your answers open WhatsApp with everything written out, and we come back with a fixed, fitted price and a date.

Rather talk? Ring 07712 646488

Question 1 of 5
What boiler do you have now?
Call us Get my price